Clean your car
Processed Protech 3d +

Your car was just treated with the new ProTech® 3D+ Paint Treatment. It is now ready to face the elements and road assaults. It will keep its shine and stay cleaner longer thanks to our 3D+ technology.
However, this advanced process requires that you observe the usual precautions in terms of car wash, and use the appropriate products to guarantee the effects of the treatment over time.

Basic precautions

1 °/ Do never directly wipe dirt with a microfiber or any kind of cloth without adapted product/shampoo. You would create swirls and damage your treatment.

2 °/ When you clean your car, do never let water dry itself on it, especially during hot weather. You risk to let lime marks on the paint. Always use a drying microfiber to remove the last drops.

3 °/ Even if your treatment slows down resin and insect marks, and make them easier to remove (with high pressure jet), never wait too long to remove it.

4 °/ Do never wash or use any product directly under sunlight. Hot bodywork will dry them too quickly: products would be less effective and some of them would let some marks.

Water cleaning

the most appropriate way

---

---

---

---

---

For a deep clean wash you can use the PROTECH® BODYWORK SHAMPOO and the SPONGE provided in your Procase.

1 °/ Wet the entire car with a garden hose or a high pressure jet.

2 °/ Prepare a clean water bucket and a shampoo bucket with the right dilution ratio.

3 °/ Clean the entire car with the sponge full of shampoo. First clean the less dirty parts (upper parts, and finish by cleaning the dirtiest parts (lower parts). Frequently clean your sponge in the clean water bucket.

4 °/ Rinse the entire car with the garden hose or high pressure jet.

5 °/ Let gently running a tap water on the top of the car to remove residues. Your car is dry! If some drops of water stay on the car, you can dry them with the YELLOW or RED MICROFIBER.

Waterless cleaning

the most practical way

---

---

1 °/ Be sure to use clean microfibers. They must be cleaned in the washing machine after each use.

2 °/ Directly spray Waterless Cleaning 3D+ on the bodywork parts to clean.
Ideally work in areas of 50cm * 50cm.

3 °/ Wipe the product with the blue microfiber to remove the dirt.

4 °/ Use the Red Microfiber for a shining and without trace result.

Cleaners & Stain Removers

SUITABLE FOR BOTH WASHING METHODS

---

---

Insect Cleaner

Thanks to the 3D+ Technology, you can easily remove insects with a water jet.
However, if some insects are still present, you can use the insect cleaner:

1 °/ Work in the shade, on a cold and dry surface.

2 °/ Spray Insect Cleaner and let it react for a few minute.

3 °/ Rinse with garden hose or high pressure jet.

NEVER WIPE INSECT REMOVER ON THE BODYWORK WITH A
Microfiber. If needed, use a sponge with a bit of insect cleanser on it.

Tag Remover

You can easily use Tar Remover on a ProTech® 3D+ Paint Treated car.

1 °/ Spray Tar Remover on a small area, out of the sun, on a cold and dry surface.

2 °/ DO NEVER WIPE TAR REMOVER WITH A
Microfiber. If necessary, use a sponge to apply Anti-tar.

3 °/ Rinse with clean water.

Glue and Resin Remover

You can easily use Glue and Resin Remover on a ProTech® 3D+ Paint Treated car.

1 °/ Spray Glue and Resin Remover on a small area, out of the sun, on a cold and dry surface.

2 °/ DO NEVER WIPE GLUE AND RESIN REMOVER WITH A
Microfiber. If necessary, use a sponge to apply Anti-resin and glue.

3 °/ Rinse with clean water.

Wheel Rim

To clean your rims, use Wheel Rim Cleaner (except on chrome-plated, anodized or polished rims):

1 °/ Spray Wheel Rim Cleaner on the four cold and dry rims

2 °/ Rinse abundantly with garden hose or high pressure jet

For specific rims (chrome-plated, anodized and polished) use Laserwash®:

1 °/ Spray Laserwash® on a rim

2 °/ Clean with a first microfiber

3° / Use a second clean microfiber for a shiny, streak-free result

Renovate Locally

Using Repair Spray

---

---

1 °/ Be sure to use clean microfibers. They must be cleaned in the washing machine after each use.

2°/ The area to be repaired must be clean, dry and cold.

2°/ Spray Repair Spray directly on the part of the bodywork to be treated.
Ideally work in areas of 50cm * 50cm.

3°/ Spread the product with the blue microfiber.

4°/ Wipe the surface with the red microfiber to remove any traces and finalize the application.

What you no longer need!

The hydrophobic, oleophobic or anti-dirt performances of your 3D+ Paint Treatment being unique, the following products become useless. They will cover and lower your treatment performance.

We advise you to erase this products from the wash routine of your 3D+ treated car:

For any questions or remarks about the maintenance
of your Protech ® 3d + Paint Treatment,
Contact our Experts: services@protech.mc

myspaforcars.fr
Our professional cleaning guide for your car

Find out more

Also discover